- Flash Movie:CHANG HO METAL CO., LTD./JIING TUNG TEC. METAL CO., LTD.-Magnesium Alloys and Processing, Various Steel Products, Stainless Steel Materials, Pre-baked Finish Materials, Corrugated Sheets for Constructing House/ Wall. -
Carbon Steel Dept
 
 
- - Address: No.442, Sec. 4, Bei-an Rd., Annan District, Tainan City 709, Taiwan (R.O.C.)
Tel: +(886)-6-3560741
Fax: +(886)-6-3560748
E-mail: service@jiingtung.com.tw
- - China: Jinsha Rd., Shabian Village, Xiabian Administration Zone, Changan Town, Dongguan City, Guangdong Province
Tel: +(86)-769-86246919
Fax: +(86)-769-86244970
| Limit of Size for Placing Orders
|
 

Non-Shining Surface (Coarseness CODE-35) Grade of Examination: 500(UE)
   
1.

SPCC-SD ( BA_CQ1, BCQ2, BCSC CT270TF )
- -
 
. Thickness: 0.30~0.34 mm Width: 850~1100 mm
  Thickness: 0.35~0.40 mm Width: 850~1219 mm
  Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~3.2 mm
(Thickness >1.6 mm , A cleanness un-guaranteed) 		Width: 850~1250 mm
. Thickness: 0.25~0.299 mm Width <= 1000 mm (CQ1 but Steel 0346 is excluded, CQ2)
seasonal order restricted to 500MT
. CQ1+(Oil tub stuff) Thickness Thickness: 0.50~2.0 mm Width: 850~1250 mm
   
2. SPCD-SD, BSPCC-SD ( CAL_CQ1, BCQ2, BCQS )
- -
 
. Thickness: 0.4 mm Width: 850~1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~0.59 mm Width: 850~1325 mm
. Thickness: 0.60~0.69 mm Width: 850~1400 mm
. Thickness: 0.70~2.00 mm Width: 850~1676 mm
   
3. SPCEN-SD (CAL Process)
- -
 
. Thickness: 0.4 mm Width: 850~1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~0.59 mm Width: 850~1325 mm
. Thickness: 0.60~0.69 mm Width: 850~1400 mm
. Thickness: 0.70~2.00 mm Width: 850~1676 mm
   
4. CF370R, B390R (BA Process)
- -
 
. Thickness: 0.55~2.00 mm Width: 850~1260 mm
   
5. CF440R (BA Process)
- -
 
. Thickness: 2.01~2.60 mm Width: 914~1219 mm
   
6. SPFC340 (CAL Process)
- -
 
. Thickness: 0.70~1.60 mm Width: 914~1676 mm
   
7. SPFC370/ 390/ 440/ 490 (CAL Process)
- -
. Thickness: 0.80~2.0 mm Width: 914~1219 mm
   
8. SPCC-2D
- -
. Thickness: 1.60~2.5 mm Width: 850~1260 mm
   
9. SPCC-4D
- -
. Thickness: 0.90~2.65 mm Width: 850~1260 mm
   
10. SPCC-8D
- -
. Thickness: 0.4 mm Width: 850~1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~3.20 mm Width: 850~1260 mm
   
11. SAE 1006M
- -
. Thickness: 0.70~0.90 mm Width: 850~1219 mm
   
12. SAE 1017
- -
. Thickness: 0.80~1.20 mm Width: 914~1219 mm
   
13. SPP
- -
. Thickness: 0.60~0.99 mm Width: 850~1450 mm
. Thickness: 1.00~1.60 mm Width: 850~1525 mm
. Thickness: 1.61~2.00 mm Width: 850~1450 mm
   
14. S35, B45, B50CM, BA684-1065M
1. Thicknes s >=1.2 mm , width > 914mm , will have trifling trace from rolling.
2. Hardness HRB>85, R35 unaccepted
- -
. Thickness: 0.40~0.99 mm Width: 890~1000 mm
. Thickness: 1.00~2.00 mm Width: 850~1000 mm
. Thickness: 2.01~2.50 mm Width: 850~1000 mm
   
15. S50CM +Cr
(1. Thickness>=1.2 mm, width >914mm, will have trifling trace from rolling. 2. Hardness HRB>85, R35 unaccepted)
- -
. Thickness: 0.70~2.50 mm Width: 850~1000 mm
   
16. SAE 4130, B4135
- -
. Thickness: 0.75~2.50 mm Width: 890~914 mm
   
17. SCM 415M (Hardness HRB 70~80)
- -
. Thickness: 0.75~2.50 mm Width: 890~914 mm
   
18. SK85M MOD
- -
. Thickness: 0.60~0.99 mm Width: 890~1000 mm
. Thickness: 1.00~2.50 mm Width: 850~1000 mm
   
19. HS840
- -
. Thickness: 0.60~1.60 mm Single Width: 914 mm
   
20. CSC CM-1
- -
. Thickness: 0.40~2.0 mm Width: 1219 mm
   
21. SPCEN (EDDQ) (Only receive order of internal plate without secondary side cutting)
- -
. Thickness: 0.4 mm Width: 850~1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~0.59 mm Width: 850~1325 mm
. Thickness: 0.60~0.69 mm Width: 850~1400 mm
. Thickness: 0.70~2.00 mm Width: 850~1676 mm
   
22. SPFC340 (CAL Process)
- -
. Thickness: 0.80~2.00 mm Single Width: 1219 mm
 

Non-Shining Surface (Coarseness CODE-35) Grade of Examination: 4600(GP)
   
1.

CQ1, BCQ2
- -
 
. Thickness: 0.30~0.39 mm Width: 850~1000 mm
. Thickness: 0.40 mm Width: 850~1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~3.2 mm Width: 850~1260 mm
   
2. CQS
- -
 
. Thickness: 0.50~1.20 mm Width: 850~1250 mm
   
3. DDQ
- -
 
. Thickness: 0.4 mm Width: 1219 mm
. Thickness: 0.41~0.50 mm Width: 850~1250 mm
. Thickness: 0.51~3.20 mm Width: 850~1265 mm
 
Shining Surface (Coarseness CODE-25)
   
1.

CQ1, BCQ2
- -
 
. Thickness: 0.30~0.40 mm Width: 850~1219 mm
.

Thickness: 0.41~2.00 mm
(thickness over 1.6 mm, cleanness not guaranteed)

 Width: 850~1250 mm
   
2. CQS
- -
 
. Thickness: 0.50~1.20 mm Width: 850~1250 mm
   
3. CSC CW250YE
- -
 
. Thickness: 0.40~2.00 mm Width: 850~1250 mm
   
4. SAE 1012
- -
 
. Thickness: 0.50~2.00 mm Width: 850~1250 mm
   
5. CSC SL 250Y
- -
 
. Thickness: 0.60~2.00 mm Width: 850~1260 mm
   
6. CSC SL 330Y
- -
 
. Thickness: 0.90~2.00 mm Width: 850~1260 mm
   
7. S35, B45, B50CM, BA684-1065M
1. Thickness>=1.2 mm, width >914mm, will have trifling trace from rolling.
2. Hardness HRB>85, R35 unaccepted.
- -
. Thickness: 0.40~0.99 mm Width: 890~1000 mm
. Thickness: 1.00~2.00 mm Width: 850~1000 mm
. Thickness: 2.01~2.50 mm Width: 850~1000 mm
   
8. SAE 4130, B4135
- -
. Thickness: 0.75~2.30 mm Width: 890~914 mm
9. SCM 415M (Hardness HRB 70~80)
- -
. Thickness: 0.75~2.30 mm Width: 890~914 mm
 
Shining Surface (Coarseness CODE-20)
   
 

CQ1
- -
 
. Thickness: 0.40 mm Width: 850~1219 mm
. Thickness: 0.41~1.60 mm Width: 850~1250 mm
 
Flatness Table B
 

CR
- -
 
. Thickness: 0.40~1.6 mm Width: 850~1250 mm
 
Thickness 1/4 tolerance guaranteed (including unidirectional 1/2 tolerance)
 

Limited to BA-CR, material quality being Grade CQ1, BCQ2, BDQ
- -
 
. Thickness: 0.40~2.3 mm Width: 850~1250 mm
 
Secondary Side-Cutting
 

For CAL process, the lower limit of width is set loose to 850 mm from 900 mm, seasonal order is limited to 10,000 MT
- -
 
. Thickness: 0.60~2.0 mm Width: 850~1650 mm
 
ASCR Order
 

Grade CQ
- -
 
. Thickness>=0.30 mm Width: 850~1219 mm
. Thickness: 0.20~0.29 mm Width: 850~916 mm
 
Sandblast Rolling
- -
 
. Thickness: 0.60~1.60 mm Width: 1219 mm
  Order is limited for the convenience of field production.
 
Non-shining Surface (Coarseness CODE-37)
  The width is limited to 914mm and 1219mm only, for the convenience of field production.
 
 
-
 
Introduction | Magnesium Alloy Dept | Baked Finish Dept | Stainless Steel Dept | Carbon Steel Dept | Contact Us | Chinese Version
 
JIING TUNG TEC. METAL CO., LTD. © 2006. Web Design & Hosting: http://www.puffy.com.tw